LP-550E, LP-570E
The difference between two models is only size of Buck body.
LP-570E is bigger than LP-550E, it may be an improper expression LP-570E is for European, American. And LP-550E is for Asian people.
Finishes up to 60 shirts per hour with our one touch, fully automatic single buck shirt press.
One operating cycle provides a high quality finishing of the shirt body, shoulder, yoke sleeves, and sleeves tucks-front and back.
New Features :
- 1. Sleeve Arm
- A new "Soft Tension Function" has been added. The sleeve arm will release tension slightly after three seconds to reduce tension on the sleeve.
- 2. Side Expander
- The new side expanders will discharge with soft tensioning when placing the shirt to avoid wrinkles.
- 3. Tuck
- A tie rod is used to improve the angle of the tuck table. A new lower tuck press has been added for lower tuck finishing quality. The cuff clamp has a tensioning function for added quality.
- 4. Body Staining Prevention
- A new heating coil with copper piping has been installed to prevent body staining.
- 5. Right Cuff Start Button
- There are now two buttons on the right side of the right start box for the selection of long and short cycles. It is no longer necessary to make a selection on the control box.
Special features :
Easy to Use
Requires Minimal Training to operate
Separate In-Line vacuum and Blower Motors allow for increased power and reduced noise
In-Line Vacuum offers Freedom from T-Clamps and ease of dressing shirt fronts
Advanced Computer System for flexibility, self-diagnostics, and reliability
Smooth, quite, and Efficient Operation
Space-Saving body and sleeve combination
Short Sleeve Clamps Included
Automatic Neck clamp offers firm grip for easier dressing of shirts
Easy to maintain, with clearly marked grease ports
Soft Padding system reduces button breakage
High Productivity
Capable of pressing 60 shirts per hour. Both machines to be operated by one operator.
High-quality Equipment
Built to stringent standards. Using the highest quality materials and top-of-the-line machining, along with strict QC, we offer aesthetically pleasing, dependable machines.
High-Quality Finishing
Our original two-piece set gives you an exceptionally beautiful finish which your customers will soon come to appreciate. One-of-a-kind cuff pleat press included to press cuff pleats into their natural position for a smooth appearance from Cuff to shoulder. A yoke press eliminates leave-off marks from front and rear presses.
Low Utility cost
Comparatively low steam, air, and electrical consumption allows for easy installation and lower utility costs over time.
Production : 50-60 shirts/hour
Specification
| Product Name |
SINGLE BUCK SHIRT PRESS |
| Model |
LP-550E |
| Power |
400v 3ph 1.65kw |
| Weight |
580kg |
| Air consumption |
43.2 L/C |
| Steam consumption |
45kg/h |
| Air pressure |
0.6MPa |
| Steam pressure |
0.6MPa |
| Air connection |
3/8B |
| Steam connection |
Inlet 3/4B
Outlet 1/2B x 3 |
| Dimension(mm) |
2105 x 1120 x 1890
(W x D x H) |
|
