|
LP-130
Double Body Shirt Press
|
|
Finishes up to 120 high quality shirts per hour with our highly automated user-friendly double buck shirt press.
One operating cycle provides a sterling finish of the shirt body and sleeves with special attention to the cuff and shirt back pleats.
New Features :
- 1. Sleeve Arm
- A new "Soft Tension Function" has been added. The sleeve arm will release tension slightly after three seconds to reduce tension on the sleeve.
- 2. Side Expander
- The new side expanders will discharge with soft tensioning when placing the shirt to avoid wrinkles.
- 3. Tuck
- A tie rod is used to improve the angle of the tuck table. A new lower tuck press has been added for lower tuck finishing quality. The cuff clamp has a tensioning function for added quality.
- 4. Body Staining Prevention
- A new heating coil with copper piping has been installed to prevent body staining.
- 5. New Steam Injector
- Larger Diameter Steam Injector improves the side and sleeve quality.
Special Features :
Smooth operation
Superior self-diagnostic system
User-friendly minimal training required
Separate in-line vacuum and blower motors allow for increased power and reduce noise
More compact than previous models
High Performance
Designed and manufactured to the same exacting standards as our Single buck LP-550, LP-570, with double the production capabilities.
High-Quality Finishing
One-of-a-kind cuff pleat press is included to press cuff pleats into their natural position, for a smooth appearance from cuff to shoulder.
Space-Saving
Combined design frees up space for other uses.
User-Friendly
Sankosha's advanced system allows for ease of operation and maintenance.
The LP-130, used with the LP-360, LP-300 Rotary Collar Cuff Press, provides you with balanced production and the ultimate in tandem setups. All pressing operations are conducted at the rear of the machine, and away from the operator.
Production : 90-120 shirts/hour
Specification
| Product Name |
Double Buck Shirt Press |
| Model |
LP-130 |
| Power |
220v 3ph 2.1kw |
| Weight |
990kg |
| Air consumption |
77 L/C |
| Steam consumption |
105kg/h |
| Air pressure |
0.6MPa |
| Steam pressure |
0.6MPa |
| Air connection |
1/2B |
| Steam connection |
Inlet 3/4B
Outlet 1/2B x 3 |
| Dimension(mm) |
2265 x 2040 x 1730
(W x D x H) |
|
|
